24/7 field line (780) 555-0147 Edmonton · Grande Prairie · Lloydminster
Marten IntegrityEdmonton · Est. 1974 Book a crew

Internal corrosion monitoring / Since 1974

Know what’s happening inside the pipe.

Access fittings, coupons, ER/LPR probes and chemical injection hardware — plus field crews who pull and swap them under full line pressure. Fifty years in Western Canadian sour service.

Book a field crew Find a part
01Since 1974 — Edmonton-owned
02H2S Alive & COR-certified crews
03Service under full line pressure
04Western Canada, by truck or helicopter

01 / Catalogue

Know the part number?
Three clicks to a quote.

Every fitting, coupon, probe and tool we stock — searchable, with spec sheets attached. Add parts to the RFQ tray and our inside-sales tech quotes it the same business day.

18 of 18 parts

Part no. Product Category Pressure class Material Spec sheet RFQ
Sour-service parts ship with MTRs and NACE MR0175 / ISO 15156 compliance letters. Need a full catalogue? Request the 2026 PDF

02 / Field service

We pull it while it’s flowing.

No shut-in, no blowdown, no flaring. Our crews retrieve and install under full line pressure up to 6,000 psi — on a lease road, a muskeg right-of-way or a pad you can only reach by air.

FS-01

Coupon pulls & installs

Scheduled pulls on your 30/60/90-day cycle. Coupons bagged, nitrogen-purged and chain-of-custody logged on site.

FS-02

Probe swaps

ER and LPR probes changed out under pressure, loggers re-zeroed and data downloaded before we leave the lease.

FS-03

Hot & cold tap supervision

New access points on live lines, with a Marten supervisor on the tapping machine and the paperwork your safety lead will ask for.

FS-04

New installs

Fitting location surveys, weld-on supervision, and placement at 12 or 6 o’clock where the corrosion actually happens.

FS-05

Injection commissioning

Quill and nozzle installs, pump rate verification and a residual check at the first downstream sample point.

FS-06

Operator training

Half-day retriever training for your own operators, at your site or in our Edmonton shop on a pressurized test loop.

03 / Monitoring programs

Hardware is the easy part. Reading it is the job.

A coupon is a 90-day question. Our corrosion technologists design where to ask it, weigh the answer in our Edmonton lab, and tell you what to change — in plain language your integrity group can act on.

  1. 01

    Program design

    Monitoring locations chosen from flow modelling, water cut and failure history — not one coupon per riser because that’s how it was done in 1995.

  2. 02

    Coupon analysis & lab reporting

    Weight loss, pit depth by microscope, deposit analysis and photographs. Reports back within 10 business days of receipt, signed by a technologist.

  3. 03

    Data interpretation

    Coupon, probe, bacteria and chemical residual data on one trend line — so a rate change is tied to a cause, and a chemical rate to a result.

Marten IntegrityCorrosion laboratory
MI-LAB-26-0417Issued 2026-09-18

Coupon analysis report

ClientHeavy-oil producer
Location07-14-049-01W4
LineNPS 6 emulsion
CouponStrip · C1018
Position6 o’clock
Exposure91 days
Deepest pit
0.0028″
General corrosionLow
0.43mpy 0.011 mm/y
Pitting rateHigh
11.2mpy 0.28 mm/y
Visual ratingBlack adherent deposit, lower third. Isolated pitting under deposit; no edge attack. Weight loss 86.2 mg.
ActionLow general rate, high pitting under deposit — pattern consistent with MIC. Run SRB/APB serial dilution at this point and review biocide batch frequency before the next pull.
Rates classified per NACE SP0775Sample report — illustrative data

This is what lands in your inbox. Not a spreadsheet of weights.

04 / Track record

Fifty-two years of pulled coupons.

Counted from our service tickets, not a brochure. The oldest fittings we still service went in before most of our crew were born.

1974

Founded in Edmonton, still independently owned

38k+

Coupon pulls and probe swaps logged since 1998

14

Field crews across three Alberta bases

4

Jurisdictions: AB, BC, SK and the NWT

Marten started in 1974 in a Quonset hut off 99 Street, machining access fittings for a handful of sour gas operators who were tired of waiting on parts from Houston. We still machine our own fittings and plugs in Edmonton, and we still answer the field line ourselves.

What changed is the scope. Today we design monitoring programs, run our own corrosion lab, and keep 14 crews moving between Fort McMurray, the Montney and the heavy-oil belt. Same rule as day one: if you can’t shut the line in, we come to it.

“We run 600-odd monitoring points. Marten pulls them on schedule, under pressure, and the report tells me which twelve I need to worry about. That’s the whole job.”
— Integrity Lead, heavy-oil producer
“Plug seized in a 1980s fitting on a sweet gas line. Their crew flew in, retrieved it, chased the threads and had a new coupon in before lunch. No shut-in.”
— Operations Superintendent, midstream gas gathering

05 / Who we work with

Anyone with a pipe they can’t shut in.

A

Producers

Sour gas, heavy oil and SAGD — gathering lines, emulsion lines, produced-water disposal.

B

Midstream & pipelines

Gas plants, compressor stations and transmission laterals under CSA Z662 integrity programs.

C

Water & wastewater

Municipal and industrial water mains, cooling water and source-water lines with MIC history.

D

Utilities

District energy loops and power-plant cooling systems where an outage is not an option.

06 / Contact

Quote, crew or program. One form.

(780) 555-0147

24/7 field line — answered by dispatch in Edmonton.

Parts

Quoted the same business day if it lands before 2 pm MT. Stock parts ship next morning.

Field crews

Confirmed within 4 hours with a crew lead’s name and a mobilization date.

Programs

A technologist calls you — not a sales rep — to scope the program.

Request a quote or crew

Goes straight to inside sales and dispatch. No newsletter.

Tray is empty — add parts from the catalogue or type them in.

Or email rfq@martenintegrity.example

0 RFQ tray—
Request quote →
Concept build by LaunchBird Websites — see the showroomLaunchBird show home